Honda 2008 TSX Owner's Manual page 219

Main Menu Table Of Contents
Bluetooth HandsFreeLink
Using Voice Control
Here are some guidelines for using
voice control:
To enter a command, press and
release the Talk button. Then,
after the beep, say your command
in a clear, natural tone.
Close the windows and the
moonroof.
Adjust the airflow from both the
dashboard and side vents so they
do not blow against the
microphone on the ceiling.
After pressing the Talk button,
wait for the beep, then give a voice
command.
216
Give a voice command in a clear
natural speaking voice without
pausing between words or
numbers. If the system cannot
recognize your command because
of the background noise, speak
louder.
If the microphone picks up voices
other than yours, the system may
not interpret your voice
commands correctly.
If the HFL does not recognize a
command, its response is, ''Pardon.''
If it doesn't recognize the
command a second time, its
response is, ''Please repeat.'' If it
doesn't recognize the command a
third time, it plays the Help
prompt.
2008 TSX
To hear a list of available options
at any time, press the Talk button,
wait for the beep, and say, ''Hands
free link help.''
Many commands can be spoken
together. For example, you can
say, ''Dial 123-456-7891.''
To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them in blocks of 3, 4, 7,
10, or 11.
To skip a voice prompt, press the
Talk button while the HFL is
speaking. The HFL will then begin
listening for your next command.