Motion Detection - D-Link DCS-6815 User Manual

Section 3 - Configuration
This section allows you to enable and configure motion detection areas.
Enable Video
Select this box to enable the motion detection feature of
Motion:
your camera.
Specifies the measurable difference between two
Sensitivity:
sequential images that would indicate motion. Please
enter a value between 0 and 100.
Specifies the amount of motion in the window being
Percentage:
monitored that is required to initiate an alert. If this is set
to 100%, motion is detected within the whole window will
trigger a snapshot.
Draw the motion detection area by dragging your mouse
Draw Motion Area:
in the window (indicated by the red square).
To erase a motion detection area, simply click on the red
Erase Motion Area:
square that you wish to remove.
Right clicking on the camera image brings up the following
menu options:
Select All: Draws a motion detection area over the entire
screen.
Clear All: Clears any motion detection areas that have
been drawn.
Restore: Restores the previously specified motion
detection areas.
D-Link DCS-6815/6817/6818 User Manual

Motion Detection

37