3.
Perform the following steps:
a) Disconnect the coin-cell battery cable from the system board.
b) Pry and remove the coin-cell battery from the adhesive.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery on the system board with adhesive side downwards.
2.
Connect the coin-cell battery cable to the system board.
3.
Install:
a) base cover
b) battery
4.
Follow the procedures in After Working Inside Your Computer.
Removing the Display Hinge
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove:
a) battery
b) base cover
c) keyboard trim
d) keyboard
23