11. TECHNICAL INFORMATION ..........15 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Make sure that the electrical informa- pliance, carefully read the supplied in- tion on the rating plate agrees with structions. The manufacturer is not re- the power supply. If not, contact an sponsible if an incorrect installation and electrician.
Page 4
• Do not keep the appliance door open without supervision to prevent to fall on it. • Do not sit or stand on the open door. • Dishwasher detergents are dangerous.
ENGLISH 2. PRODUCT DESCRIPTION Upper spray arm 2.1 Light beam Lower spray arm • When a programme operates, a red Filters light beam shows on the floor below the appliance door. When the pro- Rating plate gramme is completed, the red light Salt container changes to a green light.
Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme oper- ates. Multitab indicator. 4. PROGRAMMES Pro- Degree of Programme Duration Energy Water gramme soil phases (min)
ENGLISH Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate. 5. OPTIONS Activate the Multitab option be- • When the programme is completed. fore you set a programme.
5. Processing residues can stay in the hardness in your area. appliance. Start a programme to re- move them. Do not use detergent 2. Fill the salt container. and do not load the baskets.
ENGLISH 6.2 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt con- tainer (only for the first time). Fill the salt container with dishwash- er salt. Remove the salt around the opening of the salt container.
10 www.aeg.com 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compart- ment (A) .
ENGLISH 1. Press and hold at the same time but- 2. Close the water tap. tons until all the If you do not press the on/off programme indicators come on. button, the AUTO OFF device automatically deactivates the ap- Cancelling the programme pliance after some minutes.
12 www.aeg.com • Put hollow items (cups, glasses and • The filters are clean and correctly in- pans) with the opening down. stalled. • Make sure that cutlery and dishes do • The spray arms are not clogged. not bond together. Mix spoons with •...
ENGLISH Make sure that the filter (B) is cor- rectly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance.
Page 14
14 www.aeg.com Problem Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged.
ENGLISH 6. Adjust the released quantity of rinse 7. Fill the rinse aid dispenser. aid. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth 446 / 818 - 898 / 550 (mm) Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz...