Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 78400 VI
Summary of Contents for AEG FAVORIT 78400 VI
- Page 1 FAVORIT 78400 VI DISHWASHER USER MANUAL...
-
Page 2: Table Of Contents
Return the product to your local recycling facility or contact your municipal office. VISIT OUR WEBSITE FOR: - Products - Brochures - User manuals - Trouble shooter - Service information www.aeg.com LEGEND Warning - Important Safety information. General information and tips Environmental information Subject to change without notice... - Page 3 ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
-
Page 4: Safety Information
SAFETY INFORMATION Before the installation and use of the Water connection appliance, carefully read the supplied • Make sure not to cause damage to instructions. The manufacturer is not re- the water hoses. sponsible if an incorrect installation and use causes injuries and damages. Al- •... - Page 5 ENGLISH ble. Contact Service or an electrician • Do not drink and play with the water to change a damaged mains cable. in the appliance. • Connect the mains plug to the mains • Do not remove the dishes from the socket only at the end of the installa- appliance until the programme is tion.
-
Page 6: Product Description
PRODUCT DESCRIPTION Upper spray arm Upper basket Lower spray arm LIGHT BEAM Filters • When a programme operates, a red Rating plate light beam shows on the floor below Salt container the appliance door. When the pro- Water hardness dial gramme is completed, the red light changes to a green light. -
Page 7: Control Panel
ENGLISH CONTROL PANEL On/off button ÖKO PLUS button Display Multitab button Delay button RESET button Programme button (down) Indicators Programme button (up) Indicators Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme op- erates. -
Page 8: Programmes
PROGRAMMES Programme Type of soil Programme phases Options Type of load Prewash ÖKO PLUS Crockery, cutlery, Wash 45 °C or 70 °C pots and pans Rinses Heavy soil Prewash ÖKO PLUS Crockery, cutlery, Wash 70 °C pots and pans Rinses Normal soil Prewash Crockery and... - Page 9 ENGLISH Consumption values Duration (min) Energy (kWh) Water (l) Programme 80 - 140 0.7 - 1.3 8 - 14 130 - 150 1.1 - 1.2 10 - 11 180 - 200 0.9 - 1.0 8 - 9 170 - 190 0.7 - 0.8 8 - 9 40 - 50...
-
Page 10: Options
OPTIONS MULTITAB FUNCTION ÖKO PLUS Activate this function only when you This function decreases the tempera- use the combi detergent tablets. ture in the drying phase. The energy This function deactivates the flow of consumption decreases by 25%. rinse aid and salt. The related indicators The dishes can be wet at the end of the are off. -
Page 11: Before First Use
ENGLISH BEFORE FIRST USE 1. Make sure that the set level of the ADJUSTING THE WATER water softener agrees with the water SOFTENER hardness in your area. If not, adjust the water softener. Contact your lo- Hard water contains a high quantity of cal water authority to know the wa- minerals that can cause damage to the ter hardness in your area. -
Page 12: Manual Adjustment
Manual adjustment Turn the water hardness dial to the po- sition 1 or 2. Electronic adjustment • The indicator of button (3) contin- ues to flash. 1. Press the on/off button to activate • The acoustic signals operate. Ex- the appliance. ample: five intermittent acoustic 2. -
Page 13: Filling The Rinse Aid Dispenser
ENGLISH FILLING THE RINSE AID DISPENSER CAUTION! Only use rinse aid for dishwash- ers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. 1. Press the release button (D) to open the lid (C). -
Page 14: Daily Use
DAILY USE 1. Open the water tap. • Do not put in the appliance items that can absorb water (sponges, 2. Press the on/off button to activate household cloths). the appliance. Make sure that the appliance is in setting mode. Refer •... -
Page 15: Setting Mode
ENGLISH USING THE DETERGENT CAUTION! Use only detergents for dish- washers. 1. Press the release button (B) to open the lid (C). 2. Put the detergent in the compart- ment (A) . 3. If the programme has a prewash phase, put a small quantity of de- tergent on the inner part of the ap- pliance door. -
Page 16: Cancelling The Programme
lay time you want to set (from 1 to Make sure that there is deter- 24 hours). gent in the detergent dispenser before you start a new pro- • The delay time flashes in the dis- gramme. play. • The delay indicator is on. At the end of the programme 3. -
Page 17: Care And Cleaning
ENGLISH CARE AND CLEANING WARNING! Dirty filters and clogged spray arms decrease the washing re- sults. Before maintenance, deactivate the ap- Make a check regularly and, if pliance and disconnect the mains plug necessary, clean them. from the mains socket. CLEANING THE FILTERS 1. -
Page 18: Troubleshooting
TROUBLESHOOTING The appliance does not start or it stops • - The appliance does not drain during operation. the water. First try to find a solution to the prob- • - The anti-flood device is on. lem (refer to the table). If not, contact WARNING! Service. - Page 19 ENGLISH THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not The filters are clogged. Clean the filters. clean. The filters are not correctly Make sure that the filters are assembled and installed. correctly assembled and in- stalled.
-
Page 20: Technical Information
Problem Possible cause Possible solution The quantity of detergent Make sure that you add the was too much. correct quantity of detergent in the dispenser before you start a programme. Dry water drop The released quantity of Increase the released quanti- stains on glasses rinse aid was not sufficient . - Page 21 ENGLISH max. 60 °C Water supply Cold water or hot water Capacity Place settings 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.
- Page 23 ENGLISH...
- Page 24 117929050-A-192011...