Sony HCD-GTX88 Service Manual page 25

[CD ERROR CODE MODE]
• Display the CD error code when an error occurred.
Procedure:
1. Press x button, [ENTER] button and [DISC 1] button
simultaneously to enter the error code display mode.
2. The fluorescent indicator tube display the number of total error.
3. Each time m button and M button are turned, display
change as below.
DISPLAY OF
TOTAL ERROR
M BUTTON
DISPLAY OF
MECHANICAL
M
ERRORS
M BUTTON
DISPLAY OF
NO DISC
M
ERRORS
4. To clear the error record, operate the cold reset. (Refer to the
"MC COLD RESET".)
5. To release from this mode, press the ?/1 button or disconnect
the power OFF.
• Display of total error
Em**Ed**
Em** : The number of times for CDM (mechanical) errors.
Ed** : The number of times for BD error (after chucking the
disc.).
• Display of CDM (mechanical) error. It is show with "M" and
11 digit number.
M*$$%%&&0–
000
M* : The number of history error for mechanical. ("0" is
latest one) (Turn > button to display next error.)
$$ : Mechanical errors occur in the operation.
FF : Mechanical error during normal operation.
Other: Mechanical error during initializing operation.
m BUTTON
M
m BUTTON
M
%% : The process when trouble occurs
01 : Process ejecting DISC
02 : Process waiting for inserting DISC
03 : Process sending request to insert a disc to upper
layer.
04 : Process sending request to eject a disc to upper
layer.
05 : Process pulling a DISC in.
06 : Chucking process
07 : Re-chucking process
08 : Process cancelling chucking
&& : The operation when trouble occurs
00 : Waiting for operation.
10/11/12/13: During eject operation
20 : While pulling a disc in
30 : While cancelling chucking
40/41/42/43: During eject operation due to error.
0000 : Not used (Value is fixed to 0000).
• Display of BD error. It is shown with "D" and 11 digits
number.
D*$$%%&&#–
#00
D* : The number of error history ("0" is latest one)
(Press > button to display next error.)
$$ : The detail of trouble
01 : Can not focus
02 : GFS error
03 : Start-up time over
04 : Continuously out of focus
05 : Q code is not input for certain time
06 : Tracking on is impossible
07 : Blank disc
%% : The process when trouble occurs
01 : While SHIP process is performed
02 : While POWER OFF is processed
03 : While INITIALIZE (POWER ON) is processed.
04 : While oscillation stops
05 : From stopping oscillation to start oscillation
06 : During stop
07 : During STOP operation
08 : While start-up is processed
09 : While TOC reading is processed
0a : During search operation
0b : During PLAY operation
0c : During pause operation
0d : During PLAY manual search operation
0e : During PAUSE manual search operation
&& : Processing operation when trouble occurs
Show each STEP mentioned in %% digits.
## : Disc speed when trouble occurs.
01 : x1 speed
02 : x2 speed (for models which support x2 speed)
04 : x4 speed
00 : Not used (value is fixed to 00).
HCD-GTX88
25