Debug Commands; Asa Sm Documentation - Cisco 7600 Series Module Manual

Chapter 16 Adaptive Security Appliance Services Module

Debug commands

Requirement
To detect the following:
•
•
•
•
•
To detect errors that pertain to major or severe
events in the firewall module processes

ASA SM Documentation

Cisco ASA Series Documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp57916
ASA hardware and software compatibility information is available at:
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
ASA SM compatibility documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp45887
ASA SM hardware documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp64793
ASA SM quick start documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp64793
ASA SM New Features by Release is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp64793
OL-9392-05
If SCP messages are dropped between the
Supervisor SP or RP and the linecard
To check the SCP communication between
the linecard and supervisor
To check whether the firewall slot is up, about
the VLAN bitlist, and firewall configuration
events
To check port channel IDB configurations for
the firewall
To investigate errors of the following kind:
errors in VLAN association, errors in port
channel configurations of the firewall, SCP
errors while initializing the packets, and
invalid events
Debug Command
Use the debug firewall command.
Use the debug trifecta command.
Cisco 7600 Series Routers Module Guide
ASA SM Documentation
16-7