MP1524 INSTALLATION Location • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure the unit and the system work properly.
Page 6
MP1524 Dashboard; Tabs Reconnect the wire harness and the antenna being careful not to pinch any wires or cables. Slide the unit into the sleeve until it locks into place. To further secure the unit, use the supplied metal strap to secure the back of the unit in place.
Page 12
MP1524 20. 7 (ST/MO) Button Press and hold this button to change radio reception to either mono or stereo. 21. Volume Knob Rotate to increase or decrease the volume. When pressed the knob also performs the Select function. This is used to select audio functions (volume, bass, treble, balance or fade) and adjustment of the front panel color.
Page 14
MP1524 Remote Control Functions MODE/PAIR Button This button enables selection of either the radio, auxiliary device, SD Card, USB device, CD disc play or Bluetooth® modes. SEL Button f~nction This is used to select the audio (volume, bass, treble, balance or fade) and adjustment of the front panel color.
Page 16
MP1524 4 (ROM) Button During disc play, press this button to play the tracks on the disc in a random or shuffled order. and the icon will appear on the display panel. 17. Numeric Keys Numeric keys used to enter numbers to implement various functions.
MP1524 OPERATION Basic Operation Switching On/OH The Unit Press the Power On/Off<!> /MUTE button (1) to turn the unit ON. When the unit is ON, press and hold the Power On/Off<!> /MUTE button (1) to turn the unit OFF. Sound Adjustment Press the volume knob (21) briefly to select the desired adjustment mode.
MP1524 Mute Press the Power On/Off (<!>)/MUTE button (1) momentarily to mute the audio volume from the unit. MUTE will appear on the display. Pressing the Power On/ Off (<!>)/MUTE button (1) again or adjusting the volume level will return to the volume level setting in use before the mute function was activated.
MP1524 TROUBLESHOOTING Before going through the checklist, the check wiring connections. If any of the problems persist after checking the list, contact your nearest service dealer. Solution Symptom Cause No power. • The car ignition switch is • If the power supply is not on.
· Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Audiovox EJectronics Corporation ("the Company") is committed to Limitations quality and customer service, and are pleased to offer you this THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY Warranty.