Honeywell ADEMCO VISTA-120 User Manual page 52

Using #77 Instant Activation Mode (cont'd)
Bypass Commands
Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices
for bypass commands. If 3 (During) is selected for auto-bypassing, the
system bypasses the zone(s) specified on a particular zone list at the
beginning of the time period and unbypasses them at the end of the time
period. If it is selected for auto unbypassing, the system removes the bypass
at the beginning of the time period and restores the bypass at the end of the
time period.
Action Code
30
31
Open/Close Time periods
Activation time 3 (During) is the only valid choice for these commands.
Action Code
40
41
42
Access Control Commands
Action Code
55
56
57
58
59
60
61
62
63
64
66
67
68
69
70
71
72
73
– 52 –
Auto bypass - Zone list
Auto unbypass - Zone list
Enable Opening Time period by partition
Enable Closing Time period by partition
Enable Access Time period for access group
Access Point Grant
Access Point Grant with Override
Access Point Protect
Access Point Bypass
Access Point Lock
Access Point Exit
Access Point Group Grant
Access Point Group Grant with Override
Access Point Group Protect
Access Point Group Bypass
Access Point Group Exit
Access Point Partition Grant
Access Point Partition Grant with Override
Access Point Protect by Partition
Access Point Bypass by Partition
Access Point Lock by Partition
Access Point Exit by Partition
Access Point Trigger On
Action Specifier
Zone list #
Zone list #
Action Specifier
Partition(s)
Partition(s)
Access Group
Action Specifier
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Group #
Group #
Group #
Group #
Group #
Partition #
Partition #
Partition #
Partition #
Partition #
Partition #
Trigger #