Removal/Installation Of Wire Wheel - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Reparation instructions

Removal/installation of wire wheel

1. Detach the steering wires' rear attachment (1) .
2. Remove the screw (2) and detach the wire
wheel (3).
3. Remove the bearing's circlip (4) and knock out
the bearing (5).
4. To install the wire wheel, the reverse order is
applied.
After installation, check the wire tension (see
"Checking and adjusting steering wires").
A complete installation kit, including wire pulley,
bushing and bearing, can be purchased for the
Rider ProFlex 18 and Rider ProFlex 21.
28
– Svenska
www.mymowerparts.com