Determining If A Data Adapter Is Assigned; Figure A-8: Displaying Data Adapter Assignment - Hitachi HCX5000I User Manual

Determining if a Data Adapter is Assigned

Procedure
HCXTD840, Issue 1, July 2001
D
ETERMINING IF A
To determine if a data adapter is assigned:
1
Press and hold the <DA> key to display a new line
above the key labels. This display tells you if a data
adapter is assigned to the console.
2
Lift your console to see if a wedge-shaped device
(data adapter) is attached underneath and the console
has short legs attached to it. When you first assign a
data adapter, use this test procedure to confirm that
your data adapter is assigned properly. See
for an example of a display showing data adapter
assignment.
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
DATA ADAPTER =
R-FRQ R-LEV R-PTN

Figure A-8: Displaying data adapter assignment

If a data adapter is assigned to your console, the display
reads DATA ADAPTER = YES.
D
ATA
*** DATT TEST ***
KEY NO. =
OFF
NORMAL
LINE-LINE (USA)
NO
DA
A A
DAPTER IS SSIGNED
Figure A-8
ROM LCD
A-11