Hitachi CP-X268A Operating Manual page 55

MIU Menu (continued)
Item
SETUP
MODE
Select the communication connection control
method to use between the PC and projector.
Match to your PC's settings.
Use the ▲/▼ buttons to select the MODE to be
used.
ADHOC ó INFRASTRUCTURE
CH
Select the channel when using a wireless LAN
connection.
(Channels  to  are available)
*The available channels would be various
depending on a country. In addition, wireless
LAN card might be required due to the standard.
ENCRYPTION
Select the encrypting method.
Use the ▲/▼ buttons to select the encryption
method to be used.
WPA-PSK(AES)
ô
WPA-PSK(AES) ó WPA-PSK(TKIP) ó WEP 8bit ó WEP 64bit ó OFF
SPEED
Use the ▲/▼ buttons to select the transfer rate.
AUTOó54ó48ó36ó4ó8óóó9ó6ó5.5óó (Mbps)
• The AUTO mode automatically selects the optimum rate.
• Transfer rates may change due to the Network situation.
Mbps : Megabits per second
NETWORK MODE
Select the Network mode.
Use the ▲/▼ buttons to select the Network mode.
WIRELESS ó WIRED
~Note~
• Network mode will be initialized whenever the power is turned on
with Power switch.
• The Wireless will be enabled when Wireless Network card is installed.
• The Wired will be enabled when Wireless Network card is not installed.
Description
MIU Menu
55