Pc Connection - Toshiba 19DV665DB Owner's Manual

PC connection

As PCs are sometimes supplied with a 'conventional' CRT monitor, you may need to adjust the display settings of your PC's
graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor) - select
"1360 x 768" for the screen resolution, and select 60 Hz for the on-screen refresh rate. Switch off your PC, then connect it to
your TV while both items are still switched off.
Monitor display modes
Mode Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 720
WXGA 1280 x 768
WXGA 1360 x 768
(according to Graphic card)
Select PC input
(1) Switch on the TV.
(2) Switch on the computer.
(3) Select the PC input mode
(see page 13). (When you
use HDMI cable, select
HDMI input mode.)
Notes:
• If there is no video signal from the
computer when the unit is in PC
mode, "No Signal" will appear on
the TV screen.
• If a digital PC connection does show
a picture, proper working is not
guaranteed. Digital PC connection
is not granted for this TV.
After connecting a PC to your TV, you can now configure the display and audio settings.
To configure the display settings
(1) Press MENU SETUP to display the Main Menu
screen.
/
(2) Press to select the "Picture" menu, then
press ENTER/CH LIST
(3) On the Picture menu you can adjust various picture
properties such as brightness, contrast, colour,
sharpness, tint, colour temperature, and backlight.
(4) For a list of available menu options in the Picture menu,
see page 22.
56
V. Frequency
59.940 Hz
60.317 Hz
60.004 Hz
60.000 Hz
59.870 Hz
60.015 Hz
Use a PC-VGA cable (not supplied) to connect the TV to your PC. You can also use
an HDMI cable to connect to your PC. When the HDMI cable is used, the audio
cable is no longer required. If you use the HDMI-to-DVI cable, please connect audio
cable as same way as VGA cable. Connect cables carefully. Do not bend or break
the connector pins.
PC
To DVI
output
(All illustrated cables are not supplied.)
Example: To adjust the contrast.
1
During PC mode press MENU SETUP
/
2
Press to select "Picture", then press ENTER/CH LIST
/
Press to select "Picture Setting", then press ENTER/CH LIST
Select "Contrast", then press ENTER/CH LIST
/
Press to adjust the contrast.
3
Press EXIT/CANCEL
To configure the audio settings
(1) Press MENU SETUP
(2) Press
.
(3) On the Sound menu you can adjust the NICAM stereo
(4) For a list of available menu options in the Sound menu,
H. Frequency
31.469 kHz
37.879 kHz
48.363 kHz
45.000 kHz
47.776 kHz
47.712 kHz
TV (Back side view)
To HDMI
input
HDMI-to-DVI cable
VGA cable
To PC/HDMI
AUDIO input
Audio cable
to display the Main Menu screen.
to return to the normal screen.
to display the Main Menu
screen.
/
to select the "Sound" menu, then
press ENTER/CH LIST .
reception, and the bass, treble, balance, and sound
effects.
see page 22.
Pixel Clock Frequency
25.175 MHz
40.000 MHz
65.000 MHz
74.250 MHz
79.500 MHz
85.500 MHz
(26-inch model)
.
.
.