Quick Guide For Menu Operation - Toshiba 19DV665DB Owner's Manual

Make sure the aerial

Quick guide for menu operation

connection and power supply
Launch the Main Menu screen. For example: Select Auto Tuning.
are connected as per the
description on page 9.
1
Preparations:
• Turn on the unit with the 2
button on the unit.
The power indicator
will light up in green.
To change the unit to
standby mode, press
3
on the remote control.
Power indicator will
change from green to red.
To turn on the unit from
standby mode, press
on the remote control
again.
In standby mode, you can
also turn the unit on with
/
on the unit or
/
on the remote
CH
control.
4
To turn off the unit press
button on the unit -
to completely switch it off,
disconnect the mains
power supply.
• Press TV/DVD to
select the TV mode.
• Press ATV/DTV to
toggle between analogue
TV or digital TV mode.
5
6
7
Notes:
• If no buttons are pressed
after approximately 60
seconds, the Main Menu
screen disappears.
• Press EXIT/CANCEL
to exit the Main Menu
screen.
Quick guide for menu operation
Press INPUT .
Select "ATV", then press ENTER/CH LIST
Press MENU SETUP in ATV (analogue TV) mode or press DIGITAL MENU
(digital TV) mode to display the Main Menu screen.
When DIGITAL MENU is pressed in ATV mode, it will automatically switch to DTV mode.
And it is possible to use MENU SETUP
/
Press to select "Channel", then press
.
ENTER/CH LIST
/
Press to select "Auto Tuning", then press
to enter the Auto Tuning
ENTER/CH LIST
menu.
/
Press to select your country, then
press ENTER/CH LIST .
/
Press to select "Start", then press
.
ENTER/CH LIST
A message prompt will appear with option to delete
previously stored channels.
/
Press to select "Yes" or "No", then
press ENTER/CH LIST .
.
in DTV mode.
in DTV
11