Battery Status
remaining on the battery . A message will appear when the
battery power is low .
Battery Charging
source and charging, this icon will be displayed in the upper left
corner of the LCD touchscreen .
NOTE:
There is no power off button on the Controller . The
Controller has sleep mode and hibernate mode to reduce battery
consumption .
Troubleshooting
Do I need to run the CD to configure my Wireless Home Audio devices?
Yes . Basic settings can be applied on some devices via their screens, but
•
in order to fully configure your Wireless Home Audio devices you must
use the CD .
How do I configure my firewall to work with my Wireless Home Audio
devices?
It is possible that firewalls can prevent your devices from being found
•
and configured . Please visit www.linksysbycisco.com/homeaudio/ug
for details on how to fix your firewall settings .
How do I share my music from additional computers and allow them to
control my Wireless Home Audio devices?
Run the CD on your additional computers and select the
•
Computers option on the first screen .
Where do I find the Cisco Media Center software after installation is
complete?
Start > Programs and select Cisco Media Center . You can start the
Go to
•
Cisco Media Player from here .
Wireless-N Touchscreen Remote
The battery status icon will indicate the power
When the battery is plugged into a power
Connect
5