Connecting Speakers - Cisco Linksys DMC250 Quick Installation Manual

Connecting Speakers

For each channel (Left and Right), you will connect the
on the speaker to the
equivalently the black to the black .
To ensure proper operation and sound quality, the cables must be
connected to the speakers correctly . Do not allow any cable strands to
touch the other polarity or the rear panel of the amplifier . Make sure that
the speakers are connected to the correct Left and Right outputs .
NOTE:
If the colors are not matching at both ends, the speakers
will play out-of-phase, resulting in the reduction of dynamics
and bass and the elimination of the position of the music or
vocals in between the two speakers .
4
red
coded output terminal of the audio amplifier, and
Connecting the Speakers to the Director
red
coded input terminal
Wireless-N Music Player with Integrated Amplifier