Table of Contents
Advertisement
Connecting Speakers
For each channel (Left and Right), you will connect the
input terminal on the speaker to the
the audio amplifier, and equivalently the black to the black.
Connecting the Speakers to the Director
red
coded
red
coded output terminal of
To ensure proper operation and sound quality, the cables must
be connected to the speakers correctly. Do not allow any cable
strands to touch the other polarity or the rear panel of the
amplifier. Make sure that the speakers are connected to the
correct Left and Right outputs.
NOTE:
If the colors are not matching at both ends,
the speakers will play out-of-phase, resulting in the
reduction of dynamics and bass and the elimination
of the position of the music or vocals in between the
two speakers.
Advertisement
Table of Contents
