Table of Contents
Advertisement
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV
POWER button
Press this button to turn the TV set on or off.
RECALL button
When you want to check the channel being received, or if it has a stereo
(ST) or second audio (SA) program, press the "RECALL" button. You can
also check the time, and if the ON TIME or OFF TIME has been set.
(These functions are explained in the MENU - SET UP section beginning
on page 22.)
You can also use the "RECALL" button to quickly clear many of the other
on-screen displays.
Click to see the Remote.
MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these
buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
The "ENTER" button will set features to your preference.
CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a "0" first for
channels 1 to 9. Use the "100" button for channels 100 and higher.
Channel selection may also be performed by pressing channel up (
down (
).
) or
25
Advertisement
Table of Contents
