Configuration; Easy Search Utility - D-Link DNS-323 User Manual

Section 3 - Configuration
When first powered on, during the initial boot sequence, the DNS-323 will wait to be assigned an IP address via DHCP.
If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32.
It is recommended to use the included D-Link Easy Search Utility when accessing and configuring the DNS-323 for the
first time. If you want to change the IP address before logging in or are unable to connect to the DNS-323 IP address,
you can use the Easy Search Utility provided on the product CD to locate the device on your network and make any
needed changes.
Network The Easy Search Utility displays
Storage Device any DNS-323 devices it detects on
the network here.
Refresh
Refreshes the device list.

Configuration

Click Configuration to access the
Web based configuration of the
DNS-323.
LAN Configure the LAN Settings for the
DNS-323 here.
Apply Click Apply to save changes to the
LAN Settings.
Drive Mapping
Volumes available for mapping are
displayed here.
Available Choose an available drive letter.
Drive Letters Click Connect to map the selected
volume. Click Disconnect to
disconnect the selected mapped
volume.
Exit
Click Exit to close the utility.
D-Link DNS-33 User Manual
Configuration

Easy Search Utility

11