Hitachi 32HDX60 Operating Manual page 63

SETUP
Video 2 Auto Link
Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to
input 2.
Setup
Set The Inputs
Video1 Rename List
AVR
Video2
CAM
Video3
CBL
Video4
CBL2
Video5
Auto Link
Auto
Video Power Save
Move Return
SEL
Use THUMB STICK , ,
When AUTO is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is con-
venient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR,
laserdisc, or DVD) and any of the buttons on your remote control is pressed.
Select Off to disable this function.
Press EXIT to quit the menu.
NOTES: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To
do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described
above.
2. When using REMOTE mode, any remote control button will substitute for your video input device play button.
However, intended operation is for use with your VCR, laserdisc, or DVD play button.
3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after
three hours.
Set The Color System
NOTES: 1. If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will be
abnormal.
2. All component color system settings will affect only color component input you are currently viewing. If you are using
both sets of component input jacks, be sure to set the color system feature for both inputs.
Set Black Side Panel
NOTE: To prevent screen burn when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3
signal with gray side bar.
DVD PVR2 VCR
DVD2 SAT VCR2
LD STB
PVR STB2 Reset
Remote Off
, then press down on THUMB STICK to change AUTO LINK setting.
This function allows you to automatically change tint and color coordinates for DTV programs.
AUTO - Automatically determines the color system for the input signal.
HDTV - High Definition Television - Use for High Definition Signal Y-P
Box.
SDTV/DVD - Standard Definition Television or DVD (Digital Versatile Disc Player) Y-C
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in
Standard mode.
When the Plasma Television is powered OFF, BLACK SIDE PANEL feature will be set to OFF
automatically when the TV is powered ON. BLACK SIDE PANEL feature needs to be set every
time the TV is turned ON.
The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE.
Setup
Set The Inputs
Video1 Rename List
THUMB
AVR
Video2
STICK
CAM
Video3
CBL
Video4
SELECT
CBL2
Video5
Auto Link
Auto
Video Power Save
Move Return
SEL
63
DVD PVR2 VCR
DVD2 SAT VCR2
LD STB
PVR STB2 Reset
Remote Off
P from HDTV Set-Top
B R
C
B
.
R