Ink Cartridge Cover, Media Module Cover, And Front Cover - Brother MFC5490CN Service Manual

6.1.8

Ink Cartridge Cover, Media Module Cover, and Front Cover

(1) Lightly lift up the front end of the lower cover and remove the ink cartridge cover by
releasing its arm from the lower cover.
(2) Lightly pull up the latch on the inside of the front cover to release it from the lower cover.
Then lightly lift up the front end of the lower cover and remove the front cover.
(3) Release the left and right latches of the media module cover and pull the cover to the front.
Main PCB shield
Main PCB
Lower cover
Front cover
Assembling Notes:
• When mounting the ink cartridge cover, lightly lift up the frond end of the lower cover, fit
the two sockets over the bosses on the lower cover at the angle shown below and rotate
the ink cartridge cover. Then, set the cover arm on the rib on the right side of the lower
cover (see the illustration above).
Lower cover
• When mounting the front cover, lightly lift up the front end of the lower cover and fit the
linear boss provided on the inside bottom of the front cover over the bottom of the lower
cover.
Latch
Latch
Linear boss
110
Cover arm
Fit the sockets provided on the ink
cartridge cover over the bosses on
the lower cover.
6-33
Rib
Boss
Boss
Socket
Ink cartridge
cover
Media module cover
Ink cartridge cover
(Ink_cartridge_cover)
Latch
Cover arm
(6_24_BHL9_A4)
Confidential