Setting The Remote Control - Hitachi DV-RF7U Instruction Manual

Setting the Remote Control

The remote control will work with Hitachi televisions and
compatible brands.
/I
DVD
AUDIO DVD DUBBING
REC MODE SURROUND
100+
PLAY LIST
1
MENU
INPUT
4
MAIN MENU
7
CANCEL
MARKER
VCR Plus+ TIMER
PLAY
STOP
M.SKIP
STEP
DISC
NAVIGATION
TOP MENU
ENTER
FUNCTIONS
/I
TV POWER
TV INPUT
OPEN/
VCR CLOSE
VCR DISPLAY
DVD CH
2 3
5 6
8 9
0
TIME SLIP P in P
PAUSE
SKIP
REC
RETURN
VOL TV CH
To determine whether your television is compatible,
follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Hold down the TV POWER button and enter the two-
figure code corresponding to the manufacturer of your
television, by pressing the appropriate button on remote
control.
Manufacturer Button on
remote control
Hitachi [1]
SONY [2]
RCA [3]
SANYO [4]
ZENITH [5]
PANASONIC 1 [6]
PANASONIC 2 [7]
SHARP 1 [8]
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the remote
control.
I If several codes are indicated for your television
brand, try each one in turn until you find one that
Note
works.
You can then control the television using the following
buttons.
Button Function
TV POWER Used to switch the television on and off.
TV INPUT Used to select an external source.
VOL ( or ) Used to adjust the volume of the television.
CH (3 or 4) Used to select the required channel.
I The various functions will not necessarily work on
all televisions. If you encounter problems, operate
Note
the television directly.
Manufacturer Button on
remote control
SHARP 2 [9]
TOSHIBA [0]
JVC [CANCEL]
MITSUBISHI
MAGNAVOX [VCR Plus+]
FUNAI [TIMER]
GOLDSTAR [TIMESLIP]
SAMSUNG [P in P]
English - 23