Assembling Your Breville Product - Breville 800CPXL Manual

ASSEMBLING yOUR BREvILLE PROdUCT

ASSEMBLING THE CITRUS PRESS
1. Pull the Juice Press Arm up and
backwards, away from the Motor Base,
until fully extended.
2. Place the Juice Collector onto the Drive
Shaft on top of the Motor Base, ensuring
the Juice Spout fits into the semi-circular
groove at the front of the Motor Base.
3. Insert the Stainless Steel Filter into the
Juice Collector, aligning the indent
with arrow in the bottom of the Filter
over the corresponding tab with arrow
in the Juice Collector.
4. Place the Juicing Cone onto the Drive
Shaft and press down lightly to lock the
Cone into position.
9