No Roll Unit; Manual Printing Is Selected; Manual Printing Is Selected, But A Roll Is Loaded; Wrong Paper Feed Slot For Manual Paper - Canon imagePROGRAF iPF6300S User Manual

No Roll Unit.

The printer has received a print job, but the Roll Feed Unit is
not installed.

Manual printing is selected.

Cause
You have attempted to print on a sheet, but
no sheet is loaded.

Manual printing is selected, but a roll is loaded.

Cause
A print job for printing on
sheets was sent when a roll is
loaded.

Wrong paper feed slot for manual paper.

Cause
The Paper Feed Slot used to load
the sheet is different from the Paper
Feed Slot specified in Paper
Source in the printer driver.
iPF6300S
Cause
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load
a sheet, and then print.
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop
printing.
1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop
printing.
2. After removing the roll, load and print on a sheet of the type and size of paper you
have specified in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Load the sheet in the Paper Feed Slot matching the printer driver Paper Source
setting as follows.
1. Press ▲ or ▼ to select Eject Paper, and then press the OK button to stop
printing.
The sheet is now ejected.
2. Load the paper in the Paper Feed Slot specified in the printer driver.
The printer will resume printing.
Change the printer driver Paper Source setting to match the Paper Feed Slot
where the sheet is loaded as follows.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. In the printer driver, change the Paper Source setting to match the Paper
Feed Slot where the sheet is loaded, and then resend the print job.
Error Message > Messages regarding paper
Corrective Action
Press the Stop button and stop printing.
1. Turn the printer off and install the Roll Feed Unit.
Connect the Roll Unit Cable firmly and completely.
2. Turn the printer on and resend the print job.
Corrective Action
→P.9
Corrective Action
→P.790
→P.9
Corrective Action
>
13
1057
No Roll Unit.