Borderless Printing Is Not Possible; Problems With The Printing Quality Caused By The Type Of Paper - Canon imagePROGRAF iPF6300S User Manual

Troubleshooting
The Printhead is not being aligned
correctly.
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Depending on the type of paper,
printed lines may be noticeably
misaligned.

Borderless printing is not possible

When executing borderless printing on A1 (594
mm) or A2 (420 mm) rolls, the Spacer for Border-
less Printing was not attached to the Roll Holder.

Problems with the printing quality caused by the type of paper

For paper-specific troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide. (See "Types of
Paper.")
→P.773
12
1038
Borderless printing is not possible
> Problems with the printing quality
Cause
In the Control Panel menu, use a lower Head Height setting.
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→P.831
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Specify Proof in Print Priority in the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Print-
ing.")
Cause
>
Corrective Action
→P.64
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls,
attach the included Spacer for Borderless Printing to the Roll
Holder.
(See "Loading Rolls on the Roll Holder.")
→P.784
→P.809
Corrective Action
→P.781
iPF6300S