Main Memory - Fujitsu D3141 Tehnical Manual

3.2

Main memory

The system board provides slots for eight memory boards (two for each CPU),
each of which can accommodate up to eight memory modules (DIMMs). The
DIMM slots are suitable for 4GB, 8 GB, 16 GB, and 32 GB DDR3 RDIMMs / LV-
RDIMMs with 1066/ 1333 MHz. Thus the system board supports a maximum
memory configuration of 2048 GB.
ECC with memory scrubbing and the single-device data correction (SDDC)
function are standard. There is no support for non-ECC-DIMMs.
Although there is an assignment between memory boards and CPUs (see table
on page 39), every CPU can access the memory installed in memory boards of
all other CPUs.
The following figure shows the DIMM slot assignment of the memory riser
board.
2A
1A
2B
1B
Figure 2: DIMM slot assignment of memory riser board
I
Installing and removing memory boards and DIMMs is described in the
"PRIMERGY RX600 S6 Server Operating Manual".
D3141 (RX600 S6)
Technical Manual
Features
1D
2D
1C
2C
21