Advertisement
4.
Attach a piece of masking tape onto the console
panel below the clock.
5.
Using a flat-tip screwdriver wrapped with a shop
towel, gently pry up on the clock to release the clips;
then disconnect the connectors and remove the
clock.
6.
Remove the console panel (three self-tapping
screws, five retaining clips two retaining tabs, and
two connectors).
CLIP
RETAINING
TAB
SELF-
TAPPING
SCREWS
2 of 3
CLOCK
MASKING
TAPE
SHOP TOWEL
CONNECTORS
CONSOLE
PANEL
RETAINING
TAB
CONNECTORS
7.
Remove the radio/pocket assembly (four radio
mounting bolts, and unplug the radio connector and
the antenna lead).
POCKET
RADIO
MOUNTING
BOLT (Reuse.)
8.
Remove the left and right radio brackets from the
radio/pocket assembly (four bolts and two self-
tapping screws). Discard the pocket and the two
self-tapping screws.
SCREWS
(Reuse.)
SELF-
TAPPING
SCREW
(Discard.)
POCKET
(Discard.)
All 20000 (9809)
RADIO
CONNECTOR
RADIO
LEFT
RADIO
BRACKET
(Reuse.)
RIGHT
RADIO
BRACKET
SELF-
(Reuse.)
TAPPING
SCREW
(Discard.)
1998 American Honda Motor Co., Inc - All Rights Reserved.
ANTENNA
LEAD
SCREWS
(Reuse.)
Advertisement
