Configuring Basic Security Profiles - NETGEAR ProSafe WC7520 Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Configuring Basic Security Profiles

This screen lets you edit up to eight security profiles per managed access point, depending
on the number of profiles each access point supports. Separate profiles are applied to
802.11 b/bg/ng and 802.11a/na mode radios.
Profiles can be configured to work with different authentication
Note:
servers. For example, you could set up a Guest profile with no
authentication, an Engineering profile that uses external RADIUS
authentication, and a Marketing profile that uses external LDAP
authentication.
To add or edit security profiles:
Select Configuration > Profile > Basic > Radio. The Basic Profile Definition screen
1.
displays:
Figure 49. Editing Basic Security Profiles
By default, an NG_11g-0 profile and an NG_11a-0 profile are
Note:
present in a group. The selections available In the Network
Authentication field are affected by the authentication server
settings that you specify in the Authentication Server screen. See
Chapter 8: Configuring Security and Wireless Security Profiles
Some
selections here
cause the
Authentication
Server field
to display.
| 83