Direct Isdn Service Access - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Call a Dictation Machine
Group:
1. Enter the Dictation
Machine—Group access
code.
2. Enter the number of the
dictation machine group (2
digits).
3. When the call is answered,
use your telephone's dialpad
to operate the dictation
machine.
4. To disconnect the call, hang
up your telephone.
Listen for recall dial tone.
An idle dictation machine within the group will ring. Listen for ringback
tone.
NOTES:
1. If a called dictation machine or dictation machine group is busy, you
will hear busy tone.
2. You can perform an on-hook or off-hook camp-on to an individual
dictation machine or dictation machine group.
3. Dictation machines cannot be assigned as a destination for Call
Forward.
4. A dictation machine call cannot be placed on hold or be a member of
a call conference.
5. Dictation Machine Access is not available to single line rotary (500)
telephones since tone signals cannot be sent via rotary dialing.

DIRECT ISDN SERVICE ACCESS

If allowed at your station, you can access an ISDN service to place a call
to another station within the ISDN public network. Each ISDN public
networking service, such as MEGACOM 800 or Software Defined
Network, is associated with a certain trunk group or trunk groups. Once
an ISDN service/trunk is accessed, you may also have the option of
enabling and/or disabling the transmission of Calling Party Number
information to the distant end. Calling Party Number information can be
transmitted or blocked on a call-by-call basis, through the entrance of
specific feature access codes. These capabilities are determined by the
programming of ISDN trunk groups, as well as by your station's assigned
Class of Service.
FEATURE OPERATION
2-19