GE MDS entraNET 900 Technical Manual page 147

05-4055A01, Rev. E
10.The next screen prompts for the baud rate and byte format.
Press to set the Data Baud Rate. Press
A
baud rate options until the baud rate for your equipment is dis-
played. In the example below, the baud rate is 19200. Press
to accept the Data Baud Rate.
Press to set the Data Byte Format. Press
B
the byte format options until "8N1" is displayed. Press
accept the Data Byte Format. Then press
Figure 5-24. Set Data Baud Rate and Data Byte Format
11.The next screen prompts for the data buffer size and inter-packet
frame delay.
Press to select Buffer Size. Press
A
fer size options until "256" is displayed. Press
Buffer Size.
Press to select Inter Frame Delay. Press
B
the options until "4 Character Times" is displayed. Press
accept the Inter Frame Delay. Then press
MDS entraNET Technical Manual
to cycle through the
SPACE
to cycle through
SPACE
ENTER
to continue.
N
to cycle through the buf-
SPACE
to accept the
ENTER
to cycle through
SPACE
to continue.
N
ENTER
to
to
ENTER
137