GE MDS entraNET 900 Technical Manual page 105

05-4055A01, Rev. E
Figure 3-60. Redundancy Configuration Options Menu
• —This selection invokes an immediate
Force Switchover
switchover from the active to the standby radio.
•
Network Interface Error
disable redundancy switchover on the occurrence of a Network
Interface Error. [
Enabled, Disabled; Enabled
•
Frequency Not Calibrated
disable redundancy switchover if a frequency calibration error
occurs. If this error occurs, the radio requires factory servicing.
[
Enabled, Disabled; Enabled
• —This selection is used to enable or disable
Power Not Calibrated
redundancy switchover if an RF power calibration error occurs.
If an error occurs, the radio requires factory servicing.
[
Enabled, Disabled; Enabled
•
Lack of Associated Remotes Exceeded Threshold
shows another screen
specify the duration of time that a redundant AP waits before
considering itself to be malfunctioning. A system must have at
least one associated Remote to be functional.
MDS entraNET Technical Manual
Invisible place holder
—This selection is used to enable or
]
—This selection is used to enable or
]
]
(Figure 3-61 on Page
—This selection
96) where you can
95