Preparations - Fujitsu FX-3001SR User Manual

1.3.1
1
The following are required in order to use this product:
(1) Serial connection device
A device that has a serial console port.
(2) Conversion adapter (RJ45−D-Sub)
(Optional: FP-AD009RJ, FP-AD025RJ)
This is required to connect to a serial connection device that has a
D-Sub 9-pin or 25-pin port. Using this adapter, it can be modified to a
D-Sub connector via a Cat5 straight cable.
(3) Terminal device (local console)
Use a PC with an RS-232C interface (D-Sub 9-pin).
The PC may run on any OS.
(4) Terminal device (remote terminal)
Use a PC that can connect via Ethernet.
The PC may run on any OS.
(5) Cat5 cable
Use a Cat5 straight cable according to your environment.
Both UTP and STP are supported. The length must be within 20m.
(6) Switching hub
This is required when connecting this product to a terminal device via
Ethernet.
(7) CF card adapter
In order for the above terminal device to read/write data from/to the CF
card included with this product, a separate CF card adapter is required.
(8) Software
Install text editors and/or emulator applications (e.g. TeraTerm) that
meet the needs of your environment.
SERVIS IP-Serial
8
1p Converter
User's Guide

Preparations