Storing Custom Settings (Recall Memory) - Yamaha LC2 Music Lab Operation Manual

It's possible to group students from more than one bank—students 1 and 3 with student 10 and
11, for example. Simply press and hold the GROUP A button, select BANK 1, tap student 1 then
3, next select BANK 2 by pressing the BANK button and tap student number 10 (button 2) and
11 (button 3). Release the GROUP button A and it will begin to flash indicating the group is
active and you are working with them.

Storing Custom Settings (RECALL MEMORY)

It's possible to save your GROUP A/B/C/D configurations as custom RECALL MEMORIES.
Your control unit actually has six buttons (2, 3, 4, 5, 6 and 7) each capable of holding a
GROUP A/B/C/D configuration. Remember that RECALL MEMORY 8 and RECALL
MEMORY 1 are pre-set to turn all student buttons on (into a kind of "super-group") and all
student buttons off (students go back to the virtual practice rooms). RECALL MEMORIES 2-7
are yours to customize.
If you had six different classes, for example, you could have completely different GROUP A/B/C/D
configurations for each class at the touch of a button. If six different configurations isn't enough, the
Music Lab Management (MLM) software bundled with the LC2 Plus can store a virtually infinite
number of group configurations, with each class having its own setup file. MLM files even let you
enter student names for each class!
To store your custom group settings in your control unit, first tap the STORE button, then tap the
desired student button number 2-7.
Tap one numbered button (2-7) to assign your RECALL MEMORY.
13