Bosch D1255RB User Manual page 40

Table 6: Log Event Definitions (continued)
Text Definition
PWR RESET
Power was reset at specified time.
RPS FAIL
RPS programming session ended abnormally or
RPS using incorrect passcode or lock code.
RPS OK
RPS programming session terminated normally.
REBOOT
Control panel reset.
RELAY SET
Relay set (activated). An event modifier showing
how the relay was set follows this event in the
log.
RELY RESET
Relay reset (deactivated). An event modifier
showing how the relay was reset follows this
event in the log.
REMO Event modifier for BYPASS, RELAY SET, and
RELY RESET events. Indicates function initiated
from Remote Programming Software (RPS).
REMO RESET
Control panel reset from RPS.
Bosch Security Systems, Inc. | 8/06 | F01U011793B
Fire System | User's Guide | 13.0
Table 6: Log Event Definitions (continued)
Text Definition
RESTORAL
Restoral at device in area specified.
SDI FAIL
SDI device specified is not working. 1 to 8 =
supervised keypads, 017, 018, 019 = printers.
SDI RSTOR
The problem with SDI device specified resolved.
SENSOR
Event modifier for SENS RESET event. Shows
the relay number activated for reset.
SENS RESET
User reset area sensor in area specified. An
event modifier showing the relay number
activated for reset follows this event.
SKD CHG
User changed time for Sked specified to be
executed.
SKD XEQ Sked executed.
SKED Event modifier for BYPASS, RELAY SET, and
RELY RESET events. Indicates function initiated
by a SKED (scheduled event).
Log Event Definitions
40