Garmin Beil 407GX Cockpit Reference Manual
  1. Manuals
  2. Brands
  3. Garmin Manuals
  4. Avionics Display
  5. Beil 407GX
  6. Cockpit reference manual

Garmin Beil 407GX Cockpit Reference Manual

Integrated flight deck for the bell 407gx
Hide thumbs
Table of Contents

Advertisement

Quick Links

G1000H
™
Integrated Flight Deck
Cockpit Reference Guide for the Bell 407GX

Advertisement

Table of Contents
loading

Related Manuals for Garmin Beil 407GX

Summary of Contents for Garmin Beil 407GX

  • Page 1 G1000H ™ Integrated Flight Deck Cockpit Reference Guide for the Bell 407GX...
  • Page 3 FLIGHT INSTRUMENTS EICAS NAV/COM/TRANSPONDER/AUDIO PANEL AUTOMATIC FLIGHT CONTROL SYSTEM GPS NAVIGATION FLIGHT PLANNING PROCEDURES HAZARD AVOIDANCE ADDITIONAL FEATURES ABNORMAL OPERATION ANNUNCIATIONS & ALERTS APPENDIX INDEX...
  • Page 5 Garmin Corporation, No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel: 886/02.2642.9199 Fax: 886/02.2642.9099 For after-hours emergency, aircraft on ground (AOG) technical support for Garmin panel mount and integrated avionics systems, please contact Garmin’s AOG Hotline at 913.397.0836. Web Site Address: www.garmin.com...
  • Page 6 warrant or make any representations regarding its accuracy, reliability, or otherwise. Under no circumstances including negligence, shall AOPA be liable for any incidental, special or consequential damages that result from the use or inability to use the software or related documentation, even if AOPA or an AOPA authorized representative has been advised of the possibility of such damages.
  • Page 7 The terrain avoidance feature is only to be used as an aid for terrain avoidance. Terrain data is obtained from third party sources. Garmin is not able to independently verify the accuracy of the terrain data.
  • Page 8 System and is solely responsible for its accuracy and maintenance. The GPS system is subject to changes which could affect the accuracy and performance of all GPS equipment. Portions of the Garmin G1000H utilize GPS as a precision electronic NAVigation AID (NAVAID). Therefore, as with all NAVAIDs, information presented by the G1000H can be misused or misinterpreted and, therefore, become unsafe.
  • Page 9 CAUTION: The Garmin G1000H does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could void both the warranty and the pilot’s authority to operate this device under FAA/FCC regulations.
  • Page 10 NOTE: The data contained in the terrain and obstacle databases comes from government agencies. Garmin accurately processes and cross-validates the data, but cannot guarantee the accuracy and completeness of the data. NOTE: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
  • Page 11 Update SiriusXM product references Updated Iridium registration procedure Added other GDU 12.01 parameters Added Worldwide Weather Added 3D audio Added Voice Recognition Added MV DB update procedure RR-1 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 12 Record of Revisions Blank Page RR-2 Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 13: Table Of Contents

    Split-PA Mode .......................... 20 3D Audio ........................... 20 Enabling 3D Audio ........................20 3D Audio Troubleshooting ....................20 Voice Recognition ........................22 AUTOMATIC FLIGHT CONTROL SYSTEM ................29 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 14 Activate A Missed Approach in the Active Flight Plan ........... 52 HAZARD AVOIDANCE ........................ 53 Customizing the Hazard Displays on the Navigation Map ..........53 XM WX Satellite Weather (Optional) .................. 53 Worldwide Weather ........................ 55 Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 15 GDL 69AH Message Advisories ..................116 GDC 74H Message Advisories .................... 117 GTS 800 Message Advisories ....................117 Miscellaneous Message Advisories ................... 117 Flight Plan Import/Export Messages ................121 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 16 Table of Contents APPENDIX ............................. 123 PFD Softkey Map ........................123 MFD Softkey Map ......................... 129 Loading Updated Databases ....................131 INDEX ............................Index-1 Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 17: Flight Instruments

    2) Press the CDI Softkey again to change from VOR1 or LOC1 to VOR2 or LOC2. This places the light blue tuning box over the NAV2 standby frequency. 3) Press the CDI Softkey a third time to return to GPS. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 18: Enable/Disable Obs Mode While Navigating With Gps

    ‘ALN’ will be displayed to the left of the heading. When the magnetic heading has properly aligned, the heading value will be displayed in white and ‘ALN’ will no longer be displayed. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 19: Generic Timer

    5) Use the small FMS Knob to enter the desired altitude. 6) Press the ENT Key. 7) To remove the window, press the CLR Key or the TMR/REF Softkey. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 20: Set Barometric/Radar Altimeter (Ra Optional) Minimum Descent Altitude

    2) Press the HSI FRMT Softkey. 3) Press the 360 HSI Softkey to display the full size HSI. Press the ARC HSI Softkey to display the arc style HSI. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 21: Engine Indication System

    Engine Indication & Crew Alerting System ENGINE INDICATION SYSTEM EIS Display (Reversionary) MFD EIS Display (Normal) 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 22 PSI) Total Fuel Quantity Displays total usable fuel quantity as a bar Gauge graph. Fuel Flow Indicator Displays fuel flow in pounds per hour (PPH) (FF PPH) Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 23: Engine Power And Speed Indications

    After the engine has been started, if Q or MGT are within the takeoff limitation ranges, the G1000H displays a 5-minute countdown timer inside the PSI gauge. The 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 24: Power Assurance Check

    Dashes are displayed if data used to perform the power assurance check is not available. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 25: Crew Alerting System (Cas)

    MFD Alerts window containing CAS messages CAS Scrolling Softkeys (Enabled when more than 19 messages are displayed) Engine Page CAS Display (MFD) 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 26: Cas Message Prioritization

    CAS Window until either a newer message of the same priority appears or the condition(s) that caused the alert to display no longer exist. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 27: Nav/Com/Transponder/Audio Panel

    Frequencies in the standby field are displayed in either white or gray. The standby frequency in the tuning box is white. The other standby frequency is gray. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 28: Selecting A Nav Radio

    • GPS – If GPS Mode is selected, a magenta single line arrow (not shown) appears on the HSI and neither NAV radio is selected. Both active NAV frequencies are then displayed in white. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 29: Nav/Com Tuning

    The large knob enters MHz and the small knob enters kHz. 3) Press the Frequency Transfer Key to place the frequency into the active frequency field. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 30: Digital Clearance Recorder And Player (Optional)

    Pressing the small knob cancels the cursor. Manual Squelch Annunciator; Off for Automatic Squelch, On for Manual Relative Volume/ Squelch Squelch Scale Cursor Volume or Manual Squelch Volume/Squelch Control Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 31: Intercom Modes

    All Intercom Mode In ‘All Intercom’ mode the Pilot, Copilot, and Passengers hear each other and hear the aircraft audio. Aircraft Audio PILOT COPLT PASS ICS Keys Mode Operation 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 32 In ‘Passenger/Crew Isolate’ mode the Pilot and Copilot hear the aircraft audio and each other. The Passengers hear each other. Aircraft Audio PASS PILOT COPLT ICS Keys Mode Operation Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 33 In ‘All Isolate’ mode the Pilot and Copilot hear the aircraft audio. The Copilot has the option to use Split-COM mode. The Passengers hear each other. Aircraft Audio PASS PILOT COPLT Mode Operation ICS Keys 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 34 In ‘Copilot & Passenger Isolate’ mode the Pilot and Copilot can hear the aircraft audio. The Copilot has the option to use Split-COM mode. The Passengers hear each other. Aircraft Audio COPLT PASS PILOT ICS Keys Mode Operation Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 35: Passenger Address Mode (Pa Mode)

    Mode is annunciated by a rapid blinking of the SPKR annunciator. When in PA Mode the crew can use the PTT “Push-to-Talk” button to deliver announcements over the speaker, to the passenger headsets, or both depending on configuration. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 36: Split-Pa Mode

    COM2 at the 1 o’clock position. All other intercom positions are processed to sound like their relative seat location. By default, the GMA 350H assumes the pilot sits in the right seat. A Garmin authorized service center can make changes to the default configuration.

  • Page 37: D Audio Troubleshooting

    2) Incorrect aircraft wiring 2) See a service center as soon as (left/right channels possible to inspect/correct wiring. swapped) This wiring fault can cause fail-safe audio not to function. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 38: Voice Recognition

    GMA 350H. The following table lists the available Voice Recognition commands, the associated actions, and the voice response if applicable: Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 39 “Disable monitored COM mute” Disables monitored “Monitored COM mute disable” Voice Response: COM mute on primary “Monitor mute disabled” “Disable mute monitored COM” reception “Mute monitored COM disable” 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 40 “MUSIC mute disable” “Music mute disabled” reception Speaker Toggles Illuminate/Extinguish SPKR “Speaker” (SPKR) SPKR on/off Annunciator Toggles PA SPKR Annunciator blinks in “P - A” on/off PA mode Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 41 MUTE Annunciator MUTE) “Marker mute” Beacon section for details) Cancels “Cursor off” or cursor when Cursor “Cursor cancel” or Cursor is removed cursor is “Cancel cursor” flashing 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 42 MUSIC heard at desired position(s))” desired position(s) position(s) ** Desired position(s) = “All”, “none”, “pilot”, “copilot”, “passenger”, “pass”, or any combination of pilot, copilot, passenger, or pass. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 43 Enables 3D “Three-D audio” “Three-D audio left, three-D audio audio right” Enables 3D Audio standard Voice Response: “Standard audio” audio “Standard Audio” (disables 3D audio) Voice Recognition Commands 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 44 Nav/Com/XPDR/Audio Panel Blank Page Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 45: Automatic Flight Control System

    AFCS AUTOMATIC FLIGHT CONTROL SYSTEM Not available. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 46 AFCS Blank Page Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 47: Gps Navigation

    ENT Key to activate. To enter an altitude constraint, proceed to step 6. 6) Turn the large FMS Knob to place the cursor over the ‘ALT’ altitude field. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 48: Activate A Stored Flight Plan

    3) Press the MENU Key, select the ‘Activate Leg’ option from the page menu and press the ENT Key. This step must be used when activating a leg from the PFD. 4) With ‘Activate’ highlighted, press the ENT Key. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 49: Stop Navigating A Flight Plan

    Small Light Blue Subdued Text Small White Text with Altitude Restriction Bar Cross AT or ABOVE 5,000 ft Cross AT 2,300 ft Cross AT or BELOW 3,000 ft 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 50 Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 51: Flight Planning

    3) The current ‘PAGE MODE’ is displayed at the top of the page: ‘AUTOMATIC’ or ‘MANUAL’. To change the page mode, press the AUTO or MANUAL Softkey. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 52 5) Turn the large FMS Knob to highlight the departure time (DEP TIME) field. NOTE: The departure time on the Trip Planning Page is used for preflight planning. Refer to the Utility Page for the actual flight departure time. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 53: Create A User Waypoint Defined By Latitude & Longitude

    2) Turn the small FMS Knob to select the User WPT Information Page. 3) Press the NEW Softkey. A waypoint is created at the current aircraft position. 4) Enter the desired waypoint name. 5) Press the ENT Key. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 54: Create A User Waypoint Defined By Radials From Other Waypoints

    10) The cursor moves to the ‘REFERENCE WAYPOINTS’ field. With the first waypoint name highlighted, use the FMS Knobs to enter the desired waypoint name. Waypoints may also be selected as follows: Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 55 14) Press the ENT Key. The cursor is displayed in the ‘RAD’ (radial) field for the second waypoint. Enter the desired radial from the reference waypoint. 15) Press the ENT Key. 16) Press the FMS Knob to remove the flashing cursor. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 56: Create A User Waypoint Defined By A Radial & Distance From Another Waypoint

    Turn the small FMS Knob to the right to display the ‘NRST’ airports to the aircraft’s current position. c) Turn the large FMS Knob to select the desired waypoint. d) Press the ENT Key. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 57: Delete A User Waypoint

    5) Turn the small FMS Knob to highlight the desired waypoint. 6) Press the DELETE Softkey. 7) The message ‘Would you like to delete the user waypoint?’ is displayed. With ‘YES’ highlighted, press the ENT Key. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 58: Create A Flight Plan

    7) When all waypoints have been entered, press the FMS Knob to return to the Flight Plan Catalog Page. The new flight plan is now in the list. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 59: Import A Flight Plan From An Sd Card

    4) Turn the small FMS Knob. The Waypoint Information Window is now displayed. 5) Enter the new flight plan waypoint by one of the following: 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 60: Enter An Airway In A Flight Plan

    5) Turn the FMS Knob to select the desired airway from the list, and press the ENT Key. Low altitude airways are shown first in the list, followed by “all” altitude airways, and then high altitude airways. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 61: Invert An Active Flight Plan

    2) Turn the large FMS Knob to highlight ‘Store Flight Plan’ and press the ENT Key. 3) With ‘OK’ highlighted, press the ENT Key to store the flight plan. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 62: Edit A Stored Flight Plan

    1) Press the FPL Key on the MFD. 2) Turn the small FMS Knob to select the Flight Plan Catalog Page. 3) Press the FMS Knob to activate the cursor. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 63: Copy A Flight Plan

    2) Press the Joystick to activate the map pointer. Use the Joystick to move the pointer to the desired point on the map to be inserted as a waypoint in the flight plan. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 64: Export A Flight Plan To An Sd Card

    5) Turn the large FMS Knob to highlight the flight plan to be exported. 6) Press the EXPORT Softkey. 7) Press the ENT Key to confirm the export. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 65: Procedures

    2) Turn the large FMS Knob to highlight ‘SELECT ARRIVAL’. 3) Press the ENT Key. The cursor is displayed in the ‘ARRIVAL’ field with a list of available arrivals. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 66: Activate An Arrival Leg

    1) Press the PROC Key. 2) Turn the large FMS Knob to highlight ‘SELECT APPROACH’. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 67: Activate An Approach In The Active Flight Plan

    ACTIVATE AN APPROACH IN THE ACTIVE FLIGHT PLAN 1) Press the PROC Key. 2) Turn the large FMS Knob to highlight ‘ACTIVATE APPROACH’. 3) Press the ENT Key. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 68: Activate A Vector To Final Approach Fix

    2) Turn the large FMS Knob to highlight ‘ACTIVATE MISSED APPROACH’. 3) Press the ENT Key. A confirmation window is displayed. 4) With ‘ACTIVATE’ highlighted, press the ENT Key. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 69: Hazard Avoidance

    4) Press the LEGEND Softkey to view the legends for the selected products. If necessary, turn either FMS Knob to scroll through the list. Press the small FMS Knob or the ENT Key to return to the map. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 70 Surface Analysis. The lower symbol depicts City Forecast. The age of the displayed data for each is shown at the right. The selected forecast period is shown at the bottom. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 71: Worldwide Weather

    ICING POTENTIAL - The age of the displayed data is shown at the right. The altitude selection is shown at the bottom. WORLDWIDE WEATHER NOTE: Garmin Flight Data Services Worldwide Weather provides information for avoiding hazardous weather. Do not utilize Worldwide Weather informa- tion to penetrate hazardous weather.
  • Page 72 (DL LTNG) SIGMETs/AIRMETs Continuous (SIG/AIR) Meteorological Aerodrome Report Continuous (METARs) Winds Aloft Continuous (WIND) Pilot Weather Report Continuous (PIREPs) Temporary Flight Restrictions no product image Continuous (TFRs) Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 73 GFDS Worldwide Weather XM Weather Product Product Precipitation Next-generation Radar (NEXRAD) (PRECIP) Cloud Top Infrared Satellite (CLD TOP) (IR SAT) 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 74 Viewing Legends for Displayed GFDS Weather Products 1) Select the GFDS Weather Data Link Page. 2) Select the LEGEND Softkey to display the legends for the displayed weather products. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 75 Requesting GFDS Weather Data Manually 1) Select the GFDS Weather Data Link Page. 2) Press the MENU Key. 3) With ‘GFDS Weather Request’ highlighted, press the ENT Key. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 76 If the system cannot complete a GFDS weather data request, one or more messages will appear in the request status window as shown in the following table. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 77 GFDS Comm Error [8] A server error has occurred or invalid data received. GFDS Login Invalid There is a problem with the GFDS registration. Contact Garmin Flight Data Services at 1-866-739-5687 in the United States or 913-397-8200, ext. 1135 for assistance.
  • Page 78 No GFDS Subscription The system is not be currently subscribed to GFDS, or the access code is incorrect. Verify the access code. Contact Garmin Flight Data Services at 1-866-739-5687 in the United States or 913- 397-8200, ext. 1135 for assistance.
  • Page 79 It has no information about storms directly over the site. • When zoomed in to a range of 30 nm, each square block on the display represents an area of four square kilometers. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 80 SIGMETs and AIRMETs The entire SIGMET or AIRMET is displayed as long as any portion of it is occurring within the coverage area of the GFDS data request. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 81 Turn the large FMS Knob to select the Waypoint Page Group. b) Select the WX Softkey to select the Weather Information Page. 2) Press the FMS Knob to display the cursor. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 82 Altitude can be displayed in 3,000-foot increments up to 42,000 feet MSL. isplaying inDs loft Data 1) Select the GFDS Weather Data Link Page. 2) Select the MORE WX Softkey. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 83: Traffic Systems

    PA or Non-threat traffic arrow with ADS-B directional information, but positional accuracy is degraded. Points in the direction of the aircraft track (GTS 800 only). Traffic Symbol Description 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 84 Displaying Traffic on the Traffic Map Page 1) Turn the large FMS Knob to select the Map Page Group. 2) Turn the small FMS Knob to select the Traffic Map Page. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 85: Terrain Awareness & Warning System (Htaws) Display

    HTAWS is intended only to enhance situational awareness. NOTE: The data contained in the HTAWS databases comes from government agencies. Garmin accurately processes and cross-validates the data but cannot guarantee the accuracy and completeness of the data. 190-01254-00 Rev. B...
  • Page 86 2) Press the 360 or ARC Softkey to select the desired view. 1) Press the MENU Key. 2) Select ‘View Arc’ or ‘View 360º’ and press the ENT Key to change the view. Terrain Altitude/Color Correlation for HTAWS Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 87 Manually testing the HTAWS System: 1) Select the HTAWS Page. 2) Press the MENU Key. 3) Select ‘Test HTAWS System’ and press the ENT Key to confirm the selection. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 88 5) Turn the small FMS Knob to select the maximum altitude at which VCO alerts will be enabled from (from 50 to 500 feet), or select NONE to disable all VCO alerts. 6) When finished, press the FMS Knob. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 89: Additional Features

    1) Press the PFD Softkey. 2) Press the SYN VIS Softkey. 3) Press the SYN TERR Softkey. 4) Press the BACK Softkey to return to the previous page. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 90: Terminal Procedure Charts

    Pressing the DCLTR Softkey (declutter) once removes the taxiway markings and airport identification labels. Pressing the DCLTR Softkey twice removes VOR station ID, the VOR symbol, and intersection names if within the airport plan view. Pressing Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 91 2) Press the DP, STAR, APR, WX, and NOTAM softkeys to access charts for departures, arrivals, approaches, weather and NOTAMs Note that NOTAMS are only available with ChartView. 3) Press the GO BACK Softkey to return to the previous page. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 92: Aopa Airport Directory

    AOPA AIRPORT DIRECTORY AOPA Airport Directory adds enhanced airport information when viewing airports on the WPT-Airport Information Page. This database is updated four times per year. Check fly.garmin.com for the current database. View Airport Directory Information While viewing the WPT-Airport Information Page, if necessary, press the INFO-1 Softkey to change the softkey label to display INFO-2.

  • Page 93: Satellite Telephone And Data Link Services (Optional)

    Iridium Satellite System for telephone services. Before setting up an Iridium account, obtain the serial number of the Iridium Transceiver (GSR1) and the System ID by selecting the AUX- SYSTEM STATUS Page. Contact Garmin Flight Data Services at 1-866-739-5687 in the United States or 913-397-8200, ext. 1135.
  • Page 94 To view the Telephone Page: 1) Turn the large FMS Knob on the MFD to select the AUX page group. 2) Turn the small FMS Knob to select the AUX-TELEPHONE Page. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 95 Phone status not known Phone is disabled Phone is reserved for data transmission Calling other phone or incoming call from other phone Other phone is on hold Phones are connected 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 96 2) Turn either FMS Knob to place the cursor on ‘Disable Incoming Call Alerts’. 3) Press the ENT Key. The voice and pop-up alert will not be displayed now when an incoming call is received. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 97: Outgoing Calls

    1) Turn the large FMS Knob on the MFD to select the AUX page group. 2) Turn the small FMS Knob to select SATELLITE PHONE. 3) If necessary, press the SMS Softkey to display the AUX-TEXT MESSAGING Page. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 98 1) With the AUX-TEXT MESSAGING Page displayed, press the MENU Key on the MFD to display the Page Menu. 2) Turn either FMS Knob to place the cursor on ‘Disable New Message Popups’ or ‘Enable New Message Popups’. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 99 6) Press the SEND Softkey to send the message immediately, or press the SAVE Softkey to save the message in Outbox for sending at a later time. Press the CANCEL Softkey to delete the message. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 100 10) Press the MENU Key to display the Page Menu. 11) Turn either FMS Knob to place the cursor on ‘Stop Editing Predefined Message’. 12) Press the ENT Key. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 101 Turn either FMS Knob to place the cursor on ‘Show Inbox Messages’. c) Press the ENT Key. The message box selected for viewing is indicated at the bottom left of the list window. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 102 Turn either FMS Knob to place the cursor on ‘Sort By Date/Time’. c) Press the ENT Key. The sorting selection is indicated at the bottom center of the list window. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 103 Turn either FMS Knob to place the cursor on ‘View Selected Message’. c) Press the ENT Key. 5) To close the text message, press the CLOSE Softkey. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 104 Press the MENU Key to display the Page Menu. b) Turn either FMS Knob to place the cursor on ‘Delete Selected Message’. c) Press the ENT Key. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 105 To connect the selected network without saving: a) Turn the large FMS Knob to move the cursor to highlight ‘CONNECT’. b) Press the ENT Key. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 106 2) Turn either FMS Knob to highlight the network to be deleted. 3) Press the DELETE Softkey. The selected network is removed from the list. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 107: System Data Logging (Optional)

    Additional Features SYSTEM DATA LOGGING (OPTIONAL) NOTE: An account must be established with Garmin Flight Data Services to make full use of the System Data Logging feature. Control and monitoring of report transmissions is accomplished through the AUX- REPORT STATUS Page.

  • Page 108: Siriusxm ® Radio Entertainment (Optional)

    2) Turn the small FMS Knob to select the displayed AUX - XM Information Page. 3) Press the RADIO Softkey to show the XM Radio Page where audio entertainment is controlled. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 109 3) Press the numbered softkeys located on the bottom of the display to directly select the desired channel number. 4) Press the ENT Key to activate the selected channel. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 110: Auxiliary Video (Optional)

    0 to 100%. 5) Press the BACK Softkey to return to the previous softkey level. Press the RESET Softkey to return the display to the default settings. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...
  • Page 111 Knob to control the range setting of the map display. Pressing the softkey to display VID ACTV allows the RANGE Knob to control the zoom setting of the video display. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 112 Additional Features Blank Page Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 113: Abnormal Operation

    If GPS position is lost, or becomes invalid, selected hazards being displayed on the Navigation Map Page are removed until GPS position is again established. Loss of Hazard Functions with Loss of GPS Position 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 114: Unusual Attitudes

    Window – Flight Plan • Wind Data – Messages • Selected Heading Box – Procedures • Selected Course Box – DME Tuning • Transponder Status • Barometric Minimum Descent Altitude Box Extreme Pitch Indication Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 115: Dead Reckoning

    DR Mode. Because of this degraded accuracy, the crew must maintain position awareness using other navigation equipment until GPS-derived position data is restored. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 116 Also, while the G1000H is in DR Mode, HTAWS is disabled. Additionally, the accuracy of all nearest information (airports, airspaces, and waypoints) is questionable. Finally, airspace alerts continue to function, but with degraded accuracy. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B...

  • Page 117: Annunciations & Alerts

    FADEC is in manual operating mode. FLOAT ARM Floats Arm switch is in the armed position. FUEL FILTER External fuel filter is partially blocked before impending bypass. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 118 R/FUEL XFR Right fuel transfer pump has failed. T/R CHIP T/R Chip Detector has detected debris. XMSN CHIP Transmission Chip Detector has detected debris in transmission oil. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 119: Advisory Messages

    SAFE OPERATING ANNUNCIATION Annunciation Text Description FLOAT TEST Float system is in test mode. QUIET MODE ON Engine Quiet Mode is on. Aircraft is on the ground. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 120: Htaws Alerts

    Voice Callout (VCO) None None “Five Hundred” “Four Fifty” “Four Hundred” “Three Fifty” “Three Hundred” “Two Fifty”, “Two Hundred” “One Fifty” “One Hundred” “Fifty” HTAWS Alerts Summary Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 121: Htaws System Status Annunciations

    HTAWS audio fault No GPS position “HTAWS Not NO GPS POSITION Available” “HTAWS Available” when GPS position returns. and HTAWS is not inhibited. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 122: Voice Alerts

    “TAS System Test Played when the GTS 800 TAS system fails a pilot-initiated self test. Failed” “One o’clock” through Intruder bearing (GTS 800 only) “Twelve o’clock” or “No Bearing” Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 123: Mfd & Pfd Message Advisories

    Config service req’d. be serviced. SW MISMATCH – GDU software The MFD and PFD have different software versions version mismatch. Xtalk is off. installed. The system should be serviced. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 124: Database Message Advisories

    Ensure that the terrain card is properly inserted in display. Replace terrain card. If PFD1 DB ERR – PFD1 terrain problem persists, the system should be serviced. database error exists. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 125 The MFD detected a failure in the Airport Directory database. Ensure that the data card is properly Directory database error exists. inserted. Replace data card. If problem persists, the system should be serviced. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 126: Gma 350H Message Advisories

    GMA 350H MESSAGE ADVISORIES Message Comments GMA1 FAIL – GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The system should be serviced. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 127: Gia 63H Message Advisories

    Return the unit for repair. a problem in the unit. The system should be GIA2 SERVICE – GIA2 needs serviced. service. Return the unit for repair. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 128 Return unit for repair. COM2. COM1 and/or COM2 may still be usable. COM2 SERVICE – COM2 needs The system should be serviced when possible. service. Return unit for repair. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 129 Return unit for repair. NAV2 receiver. The receiver may still be available. NAV2 SERVICE – NAV2 needs The system should be serviced. service. Return unit for repair. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 130: Gea 71H Message Advisories

    The #1 transponder should be serviced when possible. service. Return unit for repair. XPDR1 FAIL – XPDR1 is inoperative. There is no communication with the #1 transponder. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 131: Grs 77H Message Advisories

    The G1000H system should be serviced. MANIFEST – GMU1 software The GMU 44 has incorrect software installed. mismatch, communication halted. The G1000H system should be serviced. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 132: Gsr 56H Message Advisories

    A failure has been detected in the GDL 59H router. router has failed. The system should be serviced. REGISTER GFDS – Data services are The GDL 59H is not registered with Garmin Flight Data Services, or it’s current registration data has inoperative, register w/GFDS. failed authentication.

  • Page 133: Gdc 74H Message Advisories

    Verify that stored flight plans contain correct waypoint locations. TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has expired. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 134 2 nm. position. APR INACTV – Approach is not The system notifies the pilot that the loaded approach is not active. Activate approach when required. active. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 135 WGS84 map waypoint for navigation -[xxxx] reference datum and may be positioned in error as displayed. Do not use GPS to navigate to the selected non-WGS84 waypoint. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 136 Heading Preset Mode may be used. USER MAG VAR – User magnetic User magnetic variation mode was selected during previous operation and is still active variation is active. (checked at power-up.) Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 137: Flight Plan Import/Export Messages

    The flight plan has been imported, but must be edited within the system before it can be activated for use. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 138 The stored flight plan was not successfully exported to the SD card. The SD card may not have sufficient available memory or the card may have been removed prematurely. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 139: Appendix

    CAS ↑ Moves the cursor up through the displayed messages CAS ↓ Moves the cursor down through the displayed messages 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 140 Displays XM lightning information on Inset Map (optional) Displays Worldwide Weather lightning DL LTNG information on Inset Map (optional) METAR Displays METAR flags on airport symbols shown on the Inset Map (optional) Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 141 Displays rectangular boxes representing the horizontal and vertical flight path of the active flight plan Enables synthetic terrain depiction SYN TERR HRZN HDG Displays compass heading along the Zero-Pitch line 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 142 GPS-derived distance information SET HDG Enables Heading Preset Mode HDG SYNC Synchronizes heading to the selected heading HDG - Slews heading counterclockwise HDG + Slews heading clockwise Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 143 Level 3 Description XPDR Displays transponder mode selection softkeys STBY Selects Standby Mode (transponder does not reply to any interrogations) Selects Mode A (transponder replies to interrogations) 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 144 Activates the Special Position Identification (SPI) pulse for 18 seconds, identifying the transponder return on the ATC screen TMR/REF Displays Timer/References Window NRST Displays Nearest Airports Window Displays Messages Window Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 145: Mfd Softkey Map

    Enables second-level Navigation Map softkeys TRAFFIC Displays traffic information on Navigation Map TOPO Displays topographical data (e.g., coastlines, terrain, rivers, lakes) and elevation scale on Navigation Map 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 146 DCLTR (No Declutter): All map features visible DCLTR-1: Declutters land data DCLTR-2: Declutters land and SUA data DCLTR-3: Removes everything except the active flight plan Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...

  • Page 147: Loading Updated Databases

    Synchronization can be monitored on the AUX- SYSTEM STATUS Page. In some cases it may be necessary to obtain an unlock code from Garmin in order to make the database product functional. It may also be necessary to have the system configured by a Garmin authorized service facility in order to use some database features.
  • Page 148 1) With system power OFF, remove the MFD database card from the bottom card slot of the MFD. 2) Update the Garmin databases on the MFD card. 3) Insert the MFD database card into the bottom card slot of the MFD.
  • Page 149 MFD. 5) After the navigation database files are copied to the bottom SD card, press any key to continue, as instructed. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 150 AHRS (GRS). If the system determines the MV DB needs to be updated, a prompt is displayed on the Navigation Map Page, as shown in the following figure. Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev.
  • Page 151 MFD. A progress monitor is displayed as shown in the following figure. Uploading Database to GRS When the upload is complete, the system is ready for use. 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 152 Appendix Blank Page Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 153 Code selection softkeys 11 Inset Map 123, 124, 130 COM 11, 13, 97 IOI 104 Crew Alerting System (CAS) Iridium satellite network 77, 78, 81 Messages 10–15 Index-1 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...
  • Page 154 Traffic 53, 68, 124, 129 Obstacles 110, 112 Traffic Advisory 106 Oil Temperature (OIL °F) 6 Traffic advisory 68 Traffic map page 68, 69 Transponder 11, 127, 128 Index-2 Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 155 Waypoint Selection Submenu 42 Weather data link page 53 Wi-Fi 89, 90, 91 Wind data 126 Winds Aloft 66 WIND Softkey 67 XM lightning 124, 130 XM weather 53 Index-3 190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX ™...

  • Page 156: Index

    Index Blank Page Index-4 Garmin G1000H Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. B ™...
  • Page 158 Liberty House, Bulls Copse Road Hounsdown Business Park Southampton, SO40 9RB, U.K. p: 44/0870.8501241 f: 44/0870.8501251 Garmin Corporation No. 68, Jangshu 2nd Road Shijr, Taipei County, Taiwan p: 886/2.2642.9199 f: 886/2.2642.9099 www.garmin.com 190-01254-00 Rev B © 2011 Garmin Ltd. or its subsidiaries...

This manual is also suitable for:

G1000h

Table of Contents