Building-In; Levelling - Zanussi ZDM 4714 Instruction Booklet

Building-in

This dishwasher is designed to be fitted under a
kitchen counter or worksurface.
It is essential that the recess dimensions indicated
in the diagram are followed.
No further openings for venting of the dishwasher
are required, but only to let the water fill and drain
hose and power supply cable pass through.
It is absolutely essential that the dishwasher is
disconnected from the electricity supply before
gaining access to any internal component.
Fit the dishwasher into appropriate housing space
and connect it.
II58
When inserting the machine, ensure that the water
inlet and drain hoses are not kinked or squashed.
The recess height may be anywhere between 820
and 880 mm from the floor since the dishwasher
incorporates adjustable feet (max 60 mm).
A distance of 2 mm should be allowed between the
top of the dishwasher and the counter top.

Levelling

Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door
will not catch on the levelling spacers, either side of
the cabinet.
If the door does not close correctly, loosen or
tighten the adjustable feet until the machine is
perfectly level.
22 PFI29GB