Handling Microsd Cards; Installing - Casio DT-X30 R-50C User Manual

Handheld terminal

Hide thumbs Also See for DT-X30 R-50C:

Table of Contents

Handling microSD Cards

The Handheld Terminal supports microSD card.

Since the microSD card slot is located inside the battery pack compartment, ﬁ rst

remove the battery pack when installing or removing a microSD card.

Refer to pages 20 to 22 for information on "Loading and Removing the battery pack".

Install (or replace) a microSD card according to the procedure described below.

1. Check that the power is turned off. If the power is on, always make sure to turn it off

by pressing the Power Key.

2. Remove the battery pack.

3. Insert the microSD card with the top of the card (containing lettering) facing up by

properly aligning with the slot.

Although some resistance may be felt when the card is inserted, gently insert the card

all the way into the slot until it contacts the back of the slot.

Do not push in the card on the angle.

4. Load the battery pack.

E-31

Table of Contents

Dt-x30 r-50 Dt-x30 R-50c R-50