EBU15050
Tail/brake light bulb replacement
1. Remove panel G. (See pages 8-14–8-15
for removal and installation procedures.)
2. Remove the bulb holder (together with
the bulb) by turning it counterclockwise.
1. Tail/brake light bulb holder
3. Remove the defective bulb from the bulb
holder by pushing it inward and turning it
counterclockwise.
4. Install a new bulb in the bulb holder by
pushing it inward and turning it clockwise.
5. Install the bulb holder (together with the
bulb).
6. Install the panel.
8-61