4. After adjusting, be sure to tighten the chain
adjuster locknut and the axle holding bolts.
Tightening torque:
Chain adjuster locknut:
15.5 Nm (1.55 m0kgf, 11.2 ft0lb)
Axle holding bolts (upper):
85 Nm (8.5 m0kgf, 61 ft0lb)
Axle holding bolts (lower):
60 Nm (6.0 m0kgf, 43 ft0b)
5. Finger tighten the hub stopper bolt and tight-
en the hub stopper bolt locknut.
Tightening torque:
Hub stopper bolt locknut
15.5 Nm (1.55 m0kgf, 11.2 ft0lb)
cC
If measurement
less than 27 mm (1.06in), ask a Yamaha deal-
er to replace the drive chain.
A
A. 27 mm (1.06 in)
8-26
A of the chain adjuster is