Rear Panel - Yamaha CDR400tx User Manual

Rear Panel

1 AC IN
Connect the included power cable here.
2 CDR ID
Use this switch to set a unique SCSI ID number for the CDR400tx.
3 TERMINATOR
This switch is used to set termination. Refer to the terminator setting
section for details.
4 LINE OUT (L, R)
These jacks are used to output audio to the amplifier.
5 SCSI-1, SCSI-2
These connectors are used to connect the CDR400tx in the SCSI
daisy chain.
Chapter 2 - Touring Around CDR400tx
5
CDR ID
TERMINATOR
1
1 2
SCSI-1
SCSI-2
LINE OUT
R L
OFF ON
4
3
7