Changing The Coolant - Yamaha RAPTORYFM660RS Owner's Manual

Table of Contents

Advertisement

2. If the coolant is at or below the minimum
level mark, remove the coolant reservoir
cap, and then add coolant or distilled wa-
ter to raise it to the specified level.
Coolant reservoir capacity
(up to the maximum level mark):
0.29 L (0.26 Imp qt, 0.31 US qt)
CAUTION:
_
Hard water or salt water is harmful to the
engine. You may use soft water if you can't
get distilled water.
_
NOTE:
_
If water is added, have a Yamaha dealer
G
check the antifreeze content of the cool-
ant as soon as possible.
The radiator fan operation is completely
G
automatic. It is switched on or off accord-
ing to the coolant temperature in the radi-
ator.
_
If your ATV overheats, see page 8-54 for de-
tails.
EBU10161

Changing the coolant

POTENTIAL HAZARD
Removing the radiator cap when the en-
gine and radiator are still hot.
WHAT CAN HAPPEN
You could be burned by hot fluid and
steam blown out under pressure.
HOW TO AVOID THE HAZARD
Wait for the engine to cool before re-
moving the radiator cap. Always use a
thick rag over the cap. Allow any re-
maining pressure to escape before
completely removing the cap.
8-12
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Raptor 660Raptor yfm660rs

Table of Contents