Yamaha RAPTORYFM660RS Owner's Manual page 120

Table of Contents

Advertisement

NOTE:
_
Skip steps 7–9 if the oil filter cartridge is not
being replaced.
_
7. Remove the oil filter cartridge with an oil
filter wrench.
1. Oil filter cartridge
NOTE:
_
An oil filter wrench is available at a nearby
Yamaha dealer.
_
2. Oil filter wrench
1. O-ring
8. Apply a thin coat of engine oil to the
O-ring of the new oil filter cartridge.
NOTE:
_
Make sure that the O-ring is properly seated.
_
9. Install a new oil filter cartridge with an oil
filter wrench, and then tighten it to the
specified torque with a torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
8-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Raptor 660Raptor yfm660rs

Table of Contents