Power Trim/Tilt Switch - Yamaha 40C Owner's Manual

701035
UP
DN
302013*
2-7
EMC87011
Throttle friction adjusting screw
A friction device in the remote control box
provides resistance to movement of the
remote control lever.
This is adjustable for operator preference.
An adjusting screw is located at the front
of the remote control box.
Resistance
Increase
Decrease
w
Do not overtighten the friction adjusting
screw.
If there is too much resistance, it may be
difficult to move the lever, which could
result in an accident.
EMU01125

POWER TRIM/TILT SWITCH

The power trim/tilt adjusts the motor
angle in relation to the transom. The
power trim/tilt switch is located on the
side of the bottom engine cowling. Push-
ing the switch "UP" trims the motor up,
then tilts the motor up. Pressing the
switch "DN" tilts the motor down and
trims the motor down. When the switch
button is released, the motor will stop in
its current position.
Screw
Turn clockwise
Turn counterclockwise
E