Use; Control Panel - Zanussi ZI 609 Instruction Booklet

Table of Contents

Advertisement

USE

Control panel

1
THE CONTROLS
In this fully integrated appliance the controls are locat-
ed on top of the door. When selecting a programme,
the door needs to be partially opened.
Audible signals have been introduced to help indicate
which operations the dishwasher is performing.
Short «instruction accepted» signal
When any of the buttons is pressed: a short audible
signal informs you that the machine has accepted the
instruction given; if no signal is heard when a button is
pressed, this means that a programme is already run-
ning or that the programme selected does not include
this function.
Long «programme run» signal
A continuous audible signal lasting about one second,
heard only when you close the dishwasher door,
informs you that the wash programme is starting.
Intermittent «end of programme» signal
An intermittent audible signal, lasting in total five
seconds, informs you that the wash programme has
ended.
If you wish to deactivate these audible signals, press
both the ECONOMY DRYING
START)
buttons together for about 3 seconds, until
three short signals are heard.
SO79
To reactivate the audible signals, press both buttons
together again for about 3 seconds, until the «short
instruction accepted» signal is heard.
2 3 4 5
1. ON/OFF button
On
Press this button to preset the dishwasher to accept
settings (selection of wash programmes, drying
options, delayed start, etc.).
The number
programme (Rinse and Hold) appears in the digital
display.
Off
When the wash programme has ended, the dishwasher
stops automatically (an intermittent audible signal
lasting about 5 seconds informs you of this) and a
flashing horizontal line
display.
To switch off the dishwasher at the end of the
programme, press this button again.
2. Salt indicator light
This pilot light comes on when the salt has run out, to
remind you to top it up.
If your water is level «0» there is no need of salt,
therefore the Salt indicator light will always remain on.
and DELAYED
3. Digital display
4. Programme selector button
To select the required programme, press this button
until the number corresponding to the chosen pro-
gramme appears in the digital display (3) (see wash
programme guide). To start the programme, simply
close the dishwasher door. A long audible signal
(about one second) informs you that the programme
is starting.
PPC24GB
24
6
7
8
corresponding to the first selectable
appears in the digital

Advertisement

Table of Contents
loading

Table of Contents