■ Reviewing Messages in the Stack Memory
1 Press and hold the key programmed as [Selcall],
[Status], or [Selcall + Status] for 1 second to enter the
Stack memory.
•
The last received call ID/ stack number appears.
2 Press the <B or C> key to select the desired message.
•
Press and hold the S key to toggle between the call ID/
status message and the channel name.
3 Press the Side 1 key to return to normal operation.
•
To delete the selected message, press the A or # key. To
confirm the deletion, press the S or
•
To delete all messages, press and hold the A or # key for
1 second. To confirm the deletion, press the S or
CALLER ID STACK
You can configure the Caller ID Stack to store the Caller ID
when the transceiver receives a FleetSync Selcall.
A maximum of 3 Caller IDs can be stored.
You can return a call to the received Caller ID, the same as
performing a FleetSync Selcall.
SHORT MESSAGES
This transceiver can receive short data messages which
contain a maximum of 48 characters.
•
Received short messages are displayed the same as Status
messages. A maximum of 3 short message can be stored in the
stack memory, along with 5 Status messages.
GPS REPORT
To send your location data, you must first connect a GPS
microphone to the transceiver. GPS data can be transmitted
using 2 methods: auto transmission, and upon request only.
Ask your dealer for details.
key.
key.
21