•
To delete the selected number, press the A or # key.
•
Press and hold the S key to enter the Autodial list mode.
3 Press the PTT switch or Side 2 key to make the call.
•
Press the S key to exit without making a call.
Note:
◆ You can also select A ~ D, 0 ~ 9,
Selector.
◆ To enter A, B, C or D, press and hold the
control tone sounds 2 times, then press the 2, 5, 8 or 0
keys, respectively.
STUN
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
the transceiver becomes disabled. The stun code is cancelled
when the transceiver receives a call with a revive code.
•
"STUN" appears while the transceiver is stunned.
DTMF NUMBER DISPLAY
Note: This features can only be activated when DTMF Signaling is
turned OFF.
When you receive a DTMF code containing at least 3 digits, it
will appear on the display. Each successive digit will continue
to scroll across the display, as long as each digit is received
within 1 second of the previous digit. If no digit is received for
more than 1 second, then when a new digit is received, the
display will clear and begin with the new digit.
Press any key to cancel the DTMF number display.
16
, or # by using the
key until the