Table of Contents
Advertisement
Cooking using the automatic
warm up function
All of the cooking surface's four cooking zones can
be adjusted to any of nine settings, and are
equipped with an automatic warm up function:
– ¿, lowest cooking setting
– Ç, highest cooking setting
– a, automatic warm up function.
When you select the desired cooking setting using
the
cooking setting selector sensor panel, the
cooking zone will operate at maximum power for a
certain period of time and will then automatically
switch back to the follow-on cooking setting that has
been set.
The length of time that the automatic warm up func-
tion operates depends on the follow-on cooking set-
ting selected.
1. Touch the cooking setting selector sensor panel
to set the desired cooking setting from ¿ to Æ. The
cooking setting that has been set will then be dis-
played. After a period of 5 seconds, the a (=auto-
matic warm up function) will appear in the display
in place of the cooking setting. After the warm up
period has finished, the cooking setting will once
more be displayed.
3
If you should choose a higher heat setting
while the automatic function is in operation,
e.g. from Á to Ã, the period of time that the
warm up function is in operation will be adjust-
ed accordingly. If you select a lower setting,
the warm up period will end immediately.
You can cook using the automatic warm up
function only if the cooking zone is cold or
moderately warm. If a cooking zone is already
hot when you switch it on (h indicator), the
automatic warm up function cannot be used.
Cooking without the automatic
warm up function
If you wish to use the cooking zones without the au-
tomatic warm up function, select the desired cooking
setting using the cooking setting selector sensor
panel
.
1. Touch the cooking setting selector sensor panel
in order to set the desired cooking setting from Ç
to ¿.
3
You can change the setting at any time using
the cooking setting selector sensor panels
and
.
12
Advertisement
Table of Contents
