Sharp AN-GR500H Quick Start Manual

MODEL
AN-GR 500 H
HOME CINEMA RACK SYSTEM
This quick Start Guide will help you to correctly install and operate your system.
1
Accessories
Top glass x 1
"AA" size battery
(UM/SUM-3, R6, HP-7 or similar)
x 2
2
Installing the glass and the glass protector
1. Fix the glass protector to the top glass at each corner.
Make sure the "TEMPERED" sticker on top of the glass
is facing up.
TOP VIEW
Step 1
"TEMPERED" sticker
BOTTOM VIEW
Step 1
Notes:
It is advisable for the top glass to be carried by 2 persons.
Top glass with sticker on its surface, must face upwards.
Metal frame must not be removed to ensure safety.
The maximum load for the top glass on the unit is 100 kg.
The glasses are made of reinforced glass, but dropping pointed
objects on them or strongly hitting the surface may cause them to
break.
Top and bottom glass are not fastened to the unit. Always take
care when transporting it, otherwise these parts may fall off and
there is a risk of damage and injury.
Bottom glass x 1
Remote control x 1
2. Place the top glass on top of the frame.
Make sure all the glass protector guide is fitting to the frame hole.
Step 2
"TEMPERED" sticker
Frame hole for
the glass protector
to fit in.
Step 2
Subwoofer box
"TEMPERED"
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.aspx
Customers
telephone 0870 787 4837 during office hours (or
(01) 843 4711 if telephoning from Ireland).
AC power lead x 1
FM aerial x 1
Top glass
Bottom
glass
sticker
3. Place the bottom glass on top of the subwoofer box.
Make sure the "TEMPERED" sticker on top of the glass is facing
up.
without internet access
Glass protector x 4
Adjustable nylon band x 3
Glass protector
may
TINSEA270AWZZ
08G R MW 1