Sharp CD-G14000 Operation Manual page 42

CD-G14000
Timer and sleep operation (Remote Control only) (continued)
CD-G17000
CD-G22000
ENGLISH
4
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
5
Press the
"REC", and press the MEMORY button.
The illustrations show the daily timer setting.
6
Press the
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
7
Press the
then press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
E-38
or
or button to select "PLAY" or
White
or button to adjust the hour and
or button to adjust the minutes and
9
button to Switch input with the
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or
button.
If a station has not been programmed, "NO PRESET" will
Red be displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
or button, and then
button, and then press the MEMORY
5
4
3
2
1
REMOTE
SENSOR
TIMER
POWER
ON/ STAND-BY
OPEN/
c
CLOSE
CD
5
TAPE
(1 2)
4
TUNER
(BAND) 3
PRESET PRESET
2
AUDIO
IN
1
TUNING TUNING
VOL. VOL.