Setting The Clock - Sharp CD-DV650W Operation Manual

Setting the clock

CD-DV650W
CD-DV850W
ENGLISH
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the 5 3 or 2 4 button to
select "CLOCK", and then press the MEMORY/SET button.
4
Press the 5 3 or 2 4 button to select 24-hour or 12-
hour display and then press the MEMORY/SET button.
"0:00"
"AM 12:00"
"AM 0:00"
E-17
DVD MINI SYSTEM
CD-DV650
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
5
Press the 5 3 or 2 4 button to adjust the hour and
then press the MEMORY/SET button.
Press the 5 3 or 2 4 button once to advance the time
by 1 hour. Hold it down to advance continuously.
6
Press the 5 3 or 2 4 button to adjust the minutes and
then press the MEMORY/SET button.
Press the 5 3 or 2 4 button once to advance the time by
1 minute. Hold it down to change the time in 5-minutes intervals.
o confirm the time display:
T
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the 5 3 or 2 4 button to display
the time.
The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time display
when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour display)
will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 69 for details.]
2 Perform "Setting the clock" from step 1 onwards.
Note:
The clock can also be set with the remote control.